curve-down

Flush Mount Electric Motor Design

The LabTecta®M is specifically designed for use on electric motors.

The LabTecta®M (Flush Mount Electric Motor Design) range of products are intended for use as a bearing protection device on electric motors which require flush mounted bearing isolators due to limited outboard space. This design is also available with a VFD (variable frequency drive) Grounding Ring installed to prevent premature bearing failure due to electrical fluting caused by the stray currents created when using VFD motor controllers.

  • Labtecta M
  • Cross Section

Suitable for the following industries

Metal Processing Pump Seals
ATEX
Complying with ATEX directive 2014/34/EU

The LabTecta® is the first range of bearing protection products to be certified to the latest harmonised EN Standards, which adds to the growing list of ATEX certified products from AESSEAL®.

Enquire about this product

For more information about LabTecta M or to speak to an AESSEAL® expert.

For information on our privacy practices and commitment to protecting your privacy, check out our Privacy Policy.

Increase Your Pump & Motor Bearing Life...

  • See how you can eliminate 52% of bearing failures

    Research shows that 52% of bearing failures are due to contamination of the bearing oil*. Find out how to save your bearings and improve your reliability.

    Watch the Video

    Eliminate 52% of bearing-failures
  • Eliminate 52% of bearing-failures

    Bearing Isolators: An Expert Guide

    It has long been recognized that as many as 91% of all the rolling element bearings installed in the world’s machinery fall short of reaching the manufacturer’s calculated L-10 life;

    Read the Guide

contact