Condition Monitoring Services
Corporate Office
P.O. Box 278
Nipomo, CA 93444
United States
Unlock your potential with AESSEAL®
A US corn processing company has saved thousands of dollars in less than a year following the installation of an AESSEAL DMSF double cartridge mechanical seal.
A US paper company has saved $1.5 million over the past seven years after replacing inefficient gland packing on two of its pumps with the AESSEAL CDSA double mechanical seal and tank systems.
The US petrochemical company Westlake CAO is set to save tens of thousands of dollars a year following the installation of specially-designed seal pots to replace 40 existing pots which had been in place for around half a century.
The US petrochemical company Westlake is saving millions of gallons of water each year following advice from AESSEAL on how the company might reduce its overall consumption.
An AESSEAL RDS split seal installed at a US paper mill in January 2014 is still in full operation more than ten years later.
The installation of an FIDC seal to replace single seals with no flush or API Plan has dramatically improved pump reliability at a pulp and paper company in New England.
One of the world’s leading producers of human and animal nutrition has chosen AES-Elast as the elastomer of choice for its North American operations.
AES Engineering Ltd, increases its reliability services and product offering in North America by acquiring a controlling stake in the global marine propulsion shaft sealing company (PSS Seal LLC).
Persistent failure of pumps at a chemical plant in Illinois was resulting in unacceptably high loss of product.
The UK based global engineering and reliability group, AES Engineering Ltd, has further increased its reliability services and product offering in North America by acquiring a controlling stake in the reliability company, Condition Monitoring Services (CMS), for an undisclosed sum.
A municipality in Pennsylvania was having issues with major inefficiencies in its sewage treatment system.
Long lead times in procuring replacement parts for a large non-standard component seal were causing production delays for a US textile company.