Featured Case Studies
The case studies below showcase the very best of commitment to excellence at AESSEAL across our three core pillars:
- Exceptional Customer Service – putting customers first, every time.
- Advanced Technology – delivering innovation that drives results.
- Sustainable Solutions – engineering a better future for people and our planet.
DMSF seals end contamination problem for Spanish firm
A metalworking company in northern Spain had equipped its pumps with component mechanical seals, parallel spring-mounted back-to-back, with an API Plan 54 circulation system.
CDSA seals brings huge savings for US company
A US paper company has saved $1.5 million over the past seven years after replacing inefficient gland packing on two of its pumps with the AESSEAL CDSA double mechanical seal and tank systems.
New approach for slurry pumps reduces water usage by 95%
A copper mining company in central Africa was encountering problems of excessive water usage
Change to packing saves Swiss company $millions
A chocolate producer in Switzerland has saved around ₣2.3 million ($2.6 million) over the past year following its decision to change to an AESSEAL pump packing system.
DMSF seal the answer at South African plant
The installation of the AESSEAL DMSF seal and SW2 water management system at the Ford plant in Pretoria, South Africa, has improved the MTBF of a crucial seal from less than two weeks to more than two years.
Upgrade will result in major savings for US company
A US petrochemical company is set to save tens of thousands of dollars a year following the installation of specially-designed seal pots to replace 40 existing pots which had been in place for around half a century.
Seal upgrades save over US $3.4million in seven years
A company in the Oil and Gas industry in Qatar were dissatisfied with the reliability of the mechanical seal used in crude export and oil/water booster pumps.
Full steam ahead for refinery after change to STS seals
An oil and gas refinery in northern England was experiencing poor reliability of its steam turbine.
Major savings follow installation of AESSEAL product
A petrochemical company based in the Middle East was having problems with persistent and costly seal failures.
Chemical plant saved over €500,000 in the first year
A critical glue agitator vessel was affecting productivity for a silicone manufacturing facility in France. This situation was costing the company thousands of Euros in lost production.
CDPH & EasyClean boosts MTBF from four months to seven years
The installation of a CDPH double mechanical seal along with an EasyClean™ seal support system proved to be the remedy for the frequent failures of a competitor’s seal at a power plant in Denmark.
AES-Elast the answer to seal selection problem
Employees at William Grant’s Scottish whisky distillery in Girvan, Ayshire, were having difficulty selecting the correct mechanical seals for specific applications.
Major savings for Algerian food producer
A food production plant in Algeria is saving an estimated $225,000 a year following the installation of an AESSEAL LabTecta OP bearing protector.
Improved reliability for new process
A refinery in Canada were commissioning a new lipids coprocessing initiative where renewable feedstock is injected into the cracker.
DMSF makes its mark in Japanese paper industry
The installation of an AESSEAL® DMSF™ seal at a Japanese paper plant has increased the MTBF from just six months to seven years.
Prompt delivery saves three-month delay
A 12-week delay on the commissioning of a new oil and gas plant in Kuwait was avoided when AESSEAL was able to step in to replace a defective competitor’s seal at short notice.
Rapid response impresses Saudi customer
Sourced and supplied a replacement seal in just two weeks for customer’s Oil and Gas operation in Saudi Arabi
Rapid response saves the day for UK company
The rapid repair of a faulty seal saved a UK pharmaceuticals company almost £2 million in lost production.
AESSEAL system fixes sewage problems for US township
A municipality in Pennsylvania was having issues with major inefficiencies in its sewage treatment system.
AESSEAL solves reliability problem for US paper company
The installation of the AESSEAL DMSC double mechanical seal, a close clearance bushing, a FLOWTRUE flowmeter, and a 25 litre SW2 water management system, has solved a problem of repeated seal failure for a US paper company.
Mechanical seals runs an incredible 17 years without problems
Tongaat Hullett Sugar were un happy with the amount of maintenance required on the sealing of one of its pumps.
AESSEAL help a Polyethylene plant save €144,000 in 30 months
Replacing labyrinth seals with MagTecta on 8 lobe blowers increases MTBF to over 400%.
AVT sensors save thousands for US company
Excessive vibrations in a vertical pump in a slurry pit application was leading to failure every month for the North Carolina company Befesa
AESSEAL helps UK firm to multi-million pound savings
A leading UK company is set to save more than £5 million over five years following the installation of AESSEAL LabTecta OP bearing protectors.
Dangerous oil leak problem solved by LabTecta FS
A silicon lip seal fitted to a rubber lumps reactor at a chemical plant in northern Spain failed after just ten days, resulting in the serious leakage of oil from the gearbox.
Major savings with CKD double seal
The single seals being used by Swedish water treatment company were unsuitable for the job they were being asked to do, allowing limescale to enter between the seal faces and leak out on to the floor of the plant.
AESSEAL product removes risk of HFC emissions
A specially designed double seal from AESSEAL has enabled an Italian drinks company to avoid the risk of major financial penalties which could have resulted from the release into the atmosphere of highly damaging HFC (hydrofluorocarbon) gases.
Navy reduces repair times and improves pump reliability
When a seal failed, divers had to fit blanks to the pump inlets below the waterline before it was possible to carry out a repair.
AESSEAL product brings big savings for South African company
The installation of an AESSEAL FGDSS-N single slurry seal is saving a South African mining company thousands of dollars a year in repair and maintenance costs.
Company makes huge savings with AESSEAL system
A water company in the Middle East has saved almost a quarter of a million dollars following the installation of an AESSEAL bearing protector.
Chemical Producer Saves Over £1.7 Million in Plant Downtime
A specialty chemical company at its UK processing facility were desperately trying to get spare parts for the mechanical seal on one of its critical reactors.
Fantastic seal life for notoriously difficult application
A pulp & paper company in the Canada were dissatisfied with the reliability of the mechanical seal used in its Chlorine Dioxide generator pump.
Staying cool in Cardiff
The cooling system in a High Profile office building in the Cardiff Bay area was operating with just a single duty pump and no standby.
Standard of service makes AESSEAL a clear winner
The seal on a pump at a chemical plant in the east of England was burning out on average every two weeks due to dry running, resulting in some four hours of downtime each time it failed.
DMSC saves Nestlé Purina £182k in just 10 months
Significant savings with mechanical seal and bearing protection for the pet food manufacturer
LabTecta FS the answer for gearbox problem
A repair and maintenance company in West Virginia says that its customers in the local coal mining industry have recorded major savings following a decision to upgrade to AESSEAL LabTecta FS.
ROI In Less Than A Month
a French cardboard manufacturer was experiencing seal failures every two months. AESSEAL worked closely with the customer to find the right solution.
Leakage problem solved with STS
A global energy company was facing significant losses as a result of damage to the steam turbine housing at one of its ethylene plants.
Warman conversion the answer for Spanish company
A seal conversion kit for the Warman® AH Range of Ultra Heavy Duty Slurry Pumps helped to solve a variety of problems being experienced by a Spanish aluminium producer.
Annual savings of over $2.6 million
A food and beverage customer was experiencing high leakage and contamination in their process fluid on the single pass flow through system they were operating.
Huge savings after LabTecta installation
A wastewater plant in Wales was reporting persistent problems with the failure of the seals on its ditch rotor.
DMSF solves reliability issues for Swedish company
Elastomer degradation was causing the seals on three of the boiler feed pumps at a Swedish energy plant to fail around every 12 months.
